Tamil Nadu Industrial Development Corporation (TIDCO) to establish The Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM) at the TIDEL Park, Chennai.
We recently had the privilege of hosting a Hackathon for the talented students from the University of East London, as directed by Guidance Tamil Nadu. The event, held on 13/06/2024 at TIDEL PARK, Chennai, was a remarkable collaboration between TANCAM and Guidance Tamil Nadu.
UNLEASHING ACCELERATED & SUSTAINABLE INNOVATIONS WITH MODSIM
An Awareness Session on Defence Product Development for MSMEs in Coimbatore is scheduled on 30th June 2023 from 3.30 PM to 6.30 PM in Kumaraguru College of Technology, Coimbatore. The program is jointly organized by the Kumaraguru Centre for Industrial Research and Innovation (KC.IRI), the COSIEMA CBE, Coimbatore SIDCO Industrial Estate Manufacturer's Welfare Association and the Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM.
Olir, a one-day startup meet, organised by StartupTN and TIDCO on April 13, 2023 enabled 250 startups from the state to explore ways to accelerate the commercialisation of their product ideas. The event included a tour of Tamil Nadu Center of Excellence for Advanced Manufacturing (TANCAM), a multi-sector Centre of Excellence, located at the TIDEL Park in Chennai.
Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM Sona College ofTechnology thrilled to have organized the Design Conclave on 17 March, 2023, bringing together some of the brightest minds in the design industry to discuss the latest trends, technologies, and insights.
COSIEMA Coimbatore, in association with Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM , had organized a technical conclave, in COSIEMA Hall, SIDCO, Coimbatore on 14-02-2023 (Tuesday). More than 200 participants were present from various domains including MSME's, Students and Faculty members across the Engineering and Polytechnic Colleges in Coimbatore.
A Seminar titled “Industry 4.0 for MSMEs” was conducted jointly by the FaMe TN and Indo-American Chamber of Commerce, India The seminar, organised on January 11, 2023, is a part of the FaMe TN’s initiative on making the MSMEs of Tamil Nadu Industry 4.0 ready with the aim to build confidence and scale up to Industry 4.0 technologies like IoT systems and meet the OEM’s requirements.
On 08-12-2022, TANCAM had Industrial Conclave: Connect, Access, and Collaborate. Headed by Krishnamoorthy IAS sir and Sigy Thomas IAS. To get collaborate with all District's Industries centre officials.
Students from SSN College visited on 18.10.2024 to our Centre of Excellence at Tidel Park, gaining valuable exposure to cutting-edge technologies on the 3DEXPERIENCE platform.
On 08.10.2024, students from PERI College visited our Centre of Excellence at Tidel Park to explore advancements in Design within the field of mechanical and electronics engineering using the 3DEXPERIENCE platform.
Workshop for the students from KIT-Kalaignar Karunanidhi Institute of Technology, Coimbatore.
Department of Material Science Engineering, Industrial Visit on 05.05.2023
Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM) conducted an enlightening knowledge transfer program at Periyar Maniyammai University. This event served as a valuable platform for students and faculty to gain profound insights into advanced manufacturing, fostering innovation and skill development within the academic community.
On May 16, 2022, the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM), conducted a highly informative knowledge transfer program at KCG College of Technology. This event served as a valuable platform for students and faculty alike to gain insights into the latest advancements in advanced manufacturing, fostering a culture of innovation and skill development within the academic community.
TANCAM's 3DExperience Orientation Program for CIT on September 02, 2023, was a resounding achievement. This transformative event brought together 300 students from diverse engineering disciplines, imparting crucial 3D modeling and simulation skills.
We (TANCAM) were happy to welcome a delegation from Ashok Leyland to the Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM powered by Dassault Systèmes. Led by Mr. Ramesh Kumar K HR-Head, Mr. Kalyan Ramasubramanian, Dr. Dr. Arvind A R Deputy General Manager - Project Planning and Mr. Venkatesh Raman their visit marked a milestone in our exploration of collaborations between our organizations on 28.08.2023
We were delighted to have Mr. chellapperumal Ganapathy – Vice President (Mfg. Systems Engg. & New Products) – Light Vehicle Business Unit (LVBU) , Mr. P Manian – Vice President (Mfg. Systems Engg.) – Heavy Vehicle Business Unit (HVBU) & Mr. Madhusudhan R – Director (Corporate Affairs & HR), from Brakes India Private Limited visit our Centre of Excellence on Today (28.08.2023).
On 23rd August 2023, the future of our industry stepped into the world of innovation and advanced manufacturing. Excel College students embarked on an enlightening journey to the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM), leaving behind the confines of textbooks for a day of hands-on learning
A one-day Workshop on "Temple Traditional Architectural Design in 3DEXPERIENCE Platform" organized by TANCAM and Kural Aram Foundation for Students from the Government College of Architecture and Sculpture. In an effort to bridge heritage and innovation, this workshop offers a unique opportunity for budding architects to delve into the intricacies of traditional temple architecture while harnessing the power of modern technology.
Om 19.08.2023, A group of bright minds(Students) from Vel Tech University during their recent industrial visit to the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM), powered by Dassault Systèmes. The visit marked an exciting opportunity for these future industry leaders to witness firsthand the cutting-edge technologies and practices shaping the future of manufacturing.
The 3DExperience Orientation Program on 09.08.2023, organized by TANCAM for Stella Maris Engineering College in Nagercoil, was a resounding success, imparting crucial 3D modeling and simulation skills to 300 students from diverse engineering disciplines.
The "How to Design a Drone" workshop, conducted by TANCAM at the Center of Excellence (CoE) on June 26, 2023, for Sathyabama University college students, was a resounding success. The event covered a comprehensive agenda, including drone design fundamentals, aerodynamics, materials, hands-on design sessions, and testing.
On 06.06.2023, The field officers from the Entrepreneurship Development and Innovation Institute (EDII) visited the TANCAM. During the visit, the TANCAM team showcased their impressive facilities, highlighted their expertise in upskilling students in the 3DEXPERIENCE Platform, and emphasized the services they provide to industries.
Department of Mechanical Engineering, Industrial Visit on 6.4.2023.
Team visited our TamilNadu Centre of Excellence for Advanced Manufacturing - TANCAM on 3/6/2023. Hearing the capabilities, they have discussed the possibilities through which they can leverage the benefits of the 3DEXPERIENCE platform. During the session, we discussed all the possible applications of the 3DEXPERIENCE platform across the manufacturing domains.
On 11th May 2023, the TANCAM (Tamil Nadu Centre of Excellence for Advanced Manufacturing) team had the honor of giving a presentation at Sairam Engineering College.
Impressed with the course curriculum and teaching methods in "NAAN MUDHALVAN", students and staff members from 'Aalim Muhammed Salegh College of Engineering have enrolled for a day-long workshop in Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM on 10 March 2023.
visited Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM and got to know the technological details. During the 4 hours session, the representatives got hands-on experience on the 3DEXPERIENCE platform. Our technical team briefed them about the platform and its capabilities.
On 12, January 2023, TANCAM organized a Workshop for a group of Domain-based MSME Clusters from Coimbatore District. During the session, our Team explained the CoE's facilities and the capabilities of the 3dExperience Platform, in a detailed manner
Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM organized a "Startup Connect" event for Startups on 06.01.2023 (Friday). TANCAM Team showcased the facilities and features of the 3Dexperience platform during the session.
On the 3rd of January 2023, a team of BRD officials visited the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM) to observe the facilities and assess the center's capabilities. The officials were impressed with the state-of-the-art equipment and infrastructure available at TANCAM, as well as the advanced training programs and research initiatives being carried out by the center.
A group of Key industrialists and Management People from the Hindustan Chamber of Commerce had visited and explored our TANCAM Facilities on 28th Dec 2022. The session was so interactive, and members were appreciating the core idea of TANCAM and are willing to take part in the initiative in a larger way.
A Team of Senior Officers of Armed forces who are undergoing Higher Defence Management Course at College of Defence Management, Hyderabad visited TANCAM today (December 13, 2022) to explore CoE's capabilities and how they can use the 3DEXPERIENCE technology.
Government Engineering and Polytechnic Colleges on 05.12.2022
A seminar regarding the 3DEXPERIENCE Platform and 3D Designing Tamil Nadu Centre of Excellence for Advanced Manufacturing conducted a seminar regarding the 3DEXPERIENCE Platform and 3D Designing on December 1, 2022, at 10.30 am.
On November 5, 2022, the diligent team from the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM) continued their mission of knowledge dissemination by organizing an enlightening knowledge transfer program at PERI Institute of Technology.
On October 15, 2022, the esteemed team from the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM), in collaboration with Dassault Systèmes, conducted an insightful knowledge transfer program at EXCEL ENGINEERING COLLEGE.
On October 12, 2022, the esteemed team from the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM) extended its commitment to knowledge dissemination by conducting an insightful knowledge transfer program at DMI College of Engineering in Chitambharam.
TANCAM and Sona College of Technology have established a Hub for students to Upskill on 3DEXPERIENCE platform. The training program intends to provide students with hands-on training about the most recent technologies in the Aerospace, Automotive, and EV domains.
On May 17, 2022, the dedicated team from the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM) conducted an enlightening knowledge transfer program at Loyola ICAM College of Engineering & Technology.
On April 21, 2022, the dedicated team from the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM) continued their mission of knowledge dissemination by hosting a significant knowledge transfer program at Agni Engineering College.
The Government of Tamil Nadu’s recent announcement for a renewed Aerospace and Defence (A&D) policy with a mission to create the State as a robust, world class Hi-tech Aerospace and Defence destination has gained momentum. One of the key strengths is leveraging the existing strength of 38,000 industries in TN and the highly skilled manpower that is readily available.
TANCAM is part of "Tamil Nadu Startup Thiruvizha 2023," hosted by StartupTN - a hub of innovation in our state. The event was a dynamic two-day affair at Coimbatore's CODISSIA Trade Fair Complex on August 19th and 20th. It brought together startup leaders, visionaries, and game-changers, igniting inspiration all around. The event kickstarted with a video address by Chief Minister MK Stalin, setting the tone for the exciting days ahead.
Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM had the privilege to participate in the MSME EXPO 2023, organized by COSIEMA on 11 -13 , August 2023 at Padmavathi Ammal Cultural Centre,Coimbatore.
We are delighted to share that the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM) had the privilege of showcasing its remarkable capabilities at the esteemed Strategic Electronics Summit 2023, held on the 17th and 18th of July, at the prestigious Hotel Hilton, Embassy Manyata Business Park in Bengaluru.
TANCAM (Tamil Nadu Centre of Excellence for Advanced Manufacturing) recently made waves at the India EV Show held on 26th, 27th, and 28th May 2023. Showcasing their remarkable facilities and highlighting the upskilling features of the 3DEXPERIENCE Platform
Indian Air Force Indigenisation Summit 2023 was organised by Tamil Nadu Industrial Development Corporation (TIDCO) in association with Aerospace Industry Development Association of Tamil Nadu (AIDAT) on 16th May 2023, at TIDEL park, Chennai.
TANCAM (Tamil Nadu Centre of Excellence for Advanced Manufacturing) made a significant impact at TN SKILLS 2023, held on 5th May. Showcasing their exceptional facilities and highlighting the upskilling features of the 3DEXPERIENCE Platform, TANCAM's stall became a hub of innovation and excitement for participants and industry professionals.
TANCAM (Tamil Nadu Centre of Excellence for Advanced Manufacturing) recently created a buzz at the highly anticipated SUXSS event organized by AIC Raise Incubator for Startups on 28 April 2023. The event provided an ideal platform for TANCAM to showcase its state-of-the-art facilities, upskilling features, and engineering services powered by the renowned 3DEXPERIENCE Platform. This participation underlined Tamil Nadu's commitment to nurturing startups and promoting advanced manufacturing in the region.
We (Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM) are proud to have participated in the Umagine Chennai , which was organized by the Tamil Nadu Government from March 23 to 25, 2023 at Chennai Trade Centre.
Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM presented our key abilities and facilities in the MSME CONNECT event organized by FaMe TN on 03 ,04 Mar 2023. About 500 MSMEs were present in the venue. Dr. Ravi Shankar explained the importance of digital manufacturing and the extent to which our 3DEXPERIENCE can support the MSMEs in designing and simulating their products.
TANCAM (Tamil Nadu Centre of Excellence for Advanced Manufacturing) recently made waves at the prestigious Source India Electronics Supply Chain Expo held on 13th February 2023. Showcasing their cutting-edge facilities and upskilling features, TANCAM's stall was a centre of attention for participants and industry professionals alike.
TANCAM (Tamil Nadu Centre of Excellence for Advanced Manufacturing) recently made a significant impact at the prestigious Aero India 2023, held from 13th to 17th February. Showcasing their state- of-the-art facilities and highlighting the upskilling features of the 3DEXPERIENCE platform, TANCAM's stall at the Tamil Nadu pavilion drew attention from aviation enthusiasts, industry professionals, and key stakeholders.
On January 31, 2023, to February 2, 2023, TANCAM (Tamil Nadu Centre of Excellence for Advanced Manufacturing) showcased the upskilling features of the 3DEXPERIENCE Platform through a stall. The 3DEXPERIENCE Platform is a software solution developed by Dassault Systèmes that offers a range of tools and capabilities for design, engineering, manufacturing, and collaboration.
TANCAM (Tamil Nadu Centre of Excellence for Advanced Manufacturing) recently made a significant impact at the prestigious Defence Expo 2022 in GujaratOctober 18 to 22, 2022, where we showcased our state-of-the-art facilities and the upskilling features of the renowned 3DEXPERIENCE Platform. This event served as a platform to highlight Tamil Nadu's commitment to advanced manufacturing and its role in the defence industry.
We were happy to host Ms. Maram Masoud from the Ministry of Economy, along with 20 distinguished delegates from the UAE, at our Centre of Excellence (CoE) TANCAM, Today (23.072024). This visit provided an excellent platform to showcase our state-of-the-art facilities and demonstrate how TANCAM is driving growth and innovation in Tamil Nadu.
Michaela Küchler , Consul General, Consulate General of the Federal Republic of Germany, has visited Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM facility, here in Tidel park today.
Dr. Sivarajah Ramanathan,Mission Director & CEO Tamil Nadu Startup and Innovation Mission
Thiru. Sivarajah Ramanathan, Mission Director & CEO – Startup TN
Dr. D. Karthikeyan IAS., Principal Secretary to Government Higher Education Department & Tmt. G.Laxmi Priya, I.A.S., Director of Technical Education & Chairman, Board of Examinations visited on 25.11.2023
On July 4, 2023, a distinguished delegation from the United Arab Emirates (UAE) visited to the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM) facility, situated within Tidel Park.
On the 7th of June 2023, Commodore Damien, Head of Australian Defence Staff at the Australian High Commission, visited the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM) facility, situated in Tidel Park. Accompanying him was Ms. Grace Fuller, First Secretary Defence. During their visit, they engaged in in-depth discussions regarding the technological capabilities of TANCAM and received comprehensive briefings on the ongoing projects underway at the facility.
On the 11th of May 2023, Mrs. Sabrina Ho and Mrs. Rakshanda Raisa, members from Enterprise Singapore, paid a visit to the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM) facility located at Tidel Park.
We (Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM) were delighted to have Delegates from British Deputy High Commission, visit our Centre of Excellence,(30.03.2023). It was an honor to have the opportunity to showcase our facilities and share our insights with such a distinguished group.
On March 30, 2023, a delegation from the United Kingdom had the opportunity to meet with Tamil Nadu startups at the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM). The UK delegation engaged in productive discussions with the innovative startups based at TANCAM, exploring potential avenues for collaboration, knowledge sharing, and investment opportunities.
Defence Research and Development Organization (DRDO)
Senior Officials from JETRO - Japan External Trade Organization have visited Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM facilities on 02,March, 2023. Our team has explained the facilities in detail and the services offered. Officials were appreciating the efforts and explained the importance of empowering MSMEs.
On Tuesday, February 21, US Consulate Officials visited Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM facility to learn more about its mission and working model for leveraging technology.
US CONSULATE
On Tuesday, February 21, US Consulate Officials visited Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM facility to learn more about its mission and working model for leveraging technology
Dr. Selvakumar IAS., Chairman, Karnataka Skill Development Authority, Principal Secretary to Government, Skill Development, Entrepreneurship and Livelihood Government of Karnataka visited on 09.12.22
Tmt J. Innocent Divya IAS. - Managing Director
Tamil Nadu Skill Development Corporation visited on 21.11.2022
Mr. V.Arun Roy IAS - Secretary,
Micro, Small & Medium Enterprises Department visited on 16.11.2022
Thiru S.Krishnan,IAS, Tmt Jayashree Muralidharan IAS and Tmt Vandana Garg IAS Visited 23.06.2022.
On July 12th, TANCAM had the honor of conducting a Leadership Exposure Visit for the Arangur Balar Panchayat Representatives from Cuddalore District. This inspiring event was designed to foster leadership skills, share best practices, and strengthen community ties.
During the visit, the TANCAM team showcased our state-of-the-art facilities and demonstrated how TANCAM supports advanced manufacturing with the help of the 3DEXPERIENCE platform by Dassault Systèmes. Our team explained how this innovative platform enables us to deliver cutting-edge solutions and drive efficiency in manufacturing processes. At TANCAM, we believe in the power of leadership and community empowerment. This visit is a testament to our commitment to nurturing future leaders and driving sustainable development at the grassroots level.
Our TANCAM team had the pleasure of visiting Saranathan College of Engineering, Trichy, to raise awareness about the TANCAM Centre of Excellence for Collaboration.
Our TANCAM team had the wonderful opportunity to meet with the Principal of Joseph College of Engineering and Technology, Thanjavur. This meeting was a significant step towards creating awareness about the TANCAM Centre of Excellence for Collaboration.
We are committed to fostering innovation and excellence through strategic partnerships with educational institutions. This collaboration aims to provide students and faculty with unparalleled resources and opportunities to excel in their respective fields.
Our TANCAM team had the privilege of meeting with the Principal of Arasu Engineering College, Kumbakonam, to discuss and create awareness about the TANCAM Centre of Excellence for Collaboration. We are happy to explore the opportunities this partnership brings, aiming to enhance innovation, foster cutting-edge research, and empower students and faculty with state-of-the-art resources.
Management Awareness Meet Indra Ganeshan Institutions on 17.05.2023
Mahendra Engineering College, Namakkal on 19.04.2023
National Engineering College, Kovilpatti on 20.10.2022
Mepco Schlenk Engineering College,Sivakasi on 19.10.2022
Kamaraj College of Engineering, Viruthunagar on 18.10.2022
Kalasalingam Academy of Research and Education on 18.10.2022
Bannari Amman Institute of Technology on 20.07.2022
Dr.Mahalingam College Of Engineering And Technology, Pollachi on 19.07.2022
Karpagam Academy of Higher Education, Coimbatore on 19.07.2022
Kumaraguru College of Technology, Coimbatore on 18.07.2022
Sri Sairam Engineering College, Chennai on 07.07.2022
Tamil Nadu Centre of Excellence for Advanced Manufacturing are delighted to have participated as the training partner in the esteemed Nan Mudhalvan Program. It has been an honour for us to contribute to this program and play a significant role in shaping the careers of aspiring Engineering students.
Indira Institute of Engineering and Technology, - Department of Mechanical Engineering, at Integral Coach Factory (ICF), Perambur, On 20 April 2023
GRT Institute of Engineering and Technology, - Department of Mechanical Engineering, at TANCAM Tidel Park, Chennai.
Rajalakshmi Institute of Technology, - Department of Mechanical Engineering, - at TVS Hosur
DMI College of Engineering, - Department of Mechanical Engineering, at Mayuran industries, Kanchipuram
Loyola Institute of Technology, - Department of Mechanical Engineering, at SR Foundries.
Kathir College Of Engineering – Coimbatore, at SIDCO Private Industrial Estate, Kurichi, Coimbatore
CSI College Of Engineering, - Department of Mechanical Engineering, at Ponni Sugars Ltd, Erode.
Kgisl institute of Technology – Coimbatore, - Department of Mechanical Engineering, at Masco Tea Industries, Kerala.
College of Engineering, Gunidy. - Department of Printing & Packaging, at TANCAM Tidel Park, Chennai
College of Engineering, Gunidy. - Department of Material Science Engineering, at TANCAM Tidel Park, Chennai
As a component of the NAAN MUDHALVAN training program, students enrolled in the "Product Design and Manufacturing 3D Surface Modelling" course had the opportunity to participate in industrial visits. These visits were organized by the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM) to complement the theoretical training with real-world exposure to industries.
Followed by the Faculty Development Program, TANCAM trainers played a vital role in imparting practical knowledge to students enrolled in the "Product Design and Manufacturing 3D Surface Modelling" course. On NAAN MUDHALVAN Day, TANCAM trainers visited each college and conducted training sessions using the 3DEXPERIENCE Platform by Dassault Systèmes.
The Faculty Development Program on "Product Design and Manufacturing- 3D Surface Modelling" was conducted at the Madras Institute of Technology, Chennai. In Coimbatore, The Faculty Development Program was conducted at the PSG Institute of Technology and Applied Research, Coimbatore.
Tamil Nadu Skill Development (TNSDC) has initiated a program "NAAN MUDHALVAN," aimed at empowering the youth through training and upskilling. One of the key training partners for this program is the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM). TANCAM's involvement has been instrumental in providing training to both college faculties and students.
Anand Institute of Higher Technology,Chennai on 04.07.2022
We (Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM) are honored to welcome Mr. Frederic Besson, World Wide Vice President, CATIA Global Sales, to our TANCAM Centre of Excellence, October 9, 2024!
Delegates Visit from University of East London on 05.06.2024
Dr K R Balakrishnan - MGM Healthcare Visited TANCAM
We were happy to host esteemed members of the CVRDE-DRDO team at the Center of Excellence (TANCAM) on May 29, 2024.
Boniface Pascalraj and Dheepan Jeyaraman from SSN iFOUND, visited Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM and met with Vijayadeepan S M, COO. The discussions focused on exploring mutual synergies and potential collaboration opportunities.
Senior Manager from Garden Reach Shipbuilders & Engineers Limited
Servall Industry persons visited Tancam and explored the facilities
Faculties from Sairam Engineering College Visited Centre of Excellence on 15.05.2023.
Mr. Vasantharaj C, Director- Kumaraguru Centre for Industrial Research and Innovation Visited our CoE TANCAM on 25.03.2023.
Mr. Bharat V,Chief Operating Officer - Yalamanchili Visited our CoE TANCAM on 07.03.2023.
Technical experts from ePLANE co. Visited our CoE TANCAM on 07.03.2023
The Management team from Crescent Innovation and Incubation Council (CIIC) Visited our CoE TANCAM on 02.03.2023.
Faculties of Saveetha Engineering College Visited our CoE TANCAM on 21.02.2023.
Senior Management team from National Hub for Healthcare Instrumentation Development (NHHID) Visited our CoE TANCAM on 03.02.2023
Senior Management team from National Institute of Electronics & Information Technology (NIELIT) Visited our CoE TANCAM on 02.02.2023
Mr. Anandasankar, MD - AMIGOO Aerospace Visited our CoE TANCAM on 27.01.2023
Col Manik Anand, Aerospace Division, Department of Defence Production Govt of India Visited our CoE TANCAM 25.01.2023
Mr.Manoharan & Mr.senthilkumar From Newsprint and papers Limited Visited our CoE TANCAM on 20.12.2022
SRM Group Dr.K. Kathiravan, Deputy Director, and Dr.T. Jothi Basu, Dean Visited our CoE TANCAM on 21.12.2022.
Karunya Institute of Technology and Science Visited our CoE TANCAM on 20.12.2022.
Dr T Sasilatha - Dean Academic, Dr S Priya - HOD (EEE) .Dr Madhesh - Professor (Mechanical) from AMET University Visited our CoE TANCAM on 19.12.2022.
HODs from VEL TECH Engineering Visited our CoE TANCAM on 1.12.2022
HODs from Anand Institute of Higher Technology Visited our CoE TANCAM on 1.12.2022.
Hindustan Institute of Technology Management Team Visited our CoE TANCAM on 01.12.2022
Govt college of Fine Arts College Visited our CoE TANCAM on 01.12.2022.
Automotive Component Manufacturers Association of India - Management Team Visited our CoE TANCAM on 30.11.2022
FORGE – Mr. Aravind Visited our CoE TANCAM on 29.11.2022
Management Team from Aatral Visited our CoE TANCAM on 25.11.2022
Mr.Dhuru Goyal - FAMETN Visited our CoE TANCAM on 14.11.2022
SONA College HODs Visited our CoE TANCAM on 02.08.2022
Dr. Pathalamuthu & Students from Anand Institute of Higher Technology Visited our CoE TANCAM on 25.07.2022.
We are happy to announce that Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM has signed a Memorandum of Understanding (MoU) with @CSIR-CSIO.
